A truck carrying plastic coils overturned around 2:45 p.m. on the A10, between Libourne Saint-Antoine and Blaye Montendre, in the direction of Paris. Traffic is fully interrupted. A 4 km cap was formed. Yolande, from the Vinci Autoroutes traffic information center, said the bypass routes.
Compulsory outing at Libourne Saint Antoine
To allow the lifting, evacuation and cleaning operations up to the accidental heavy goods vehicle, the A10 is again cut towards the north. Impossible to go beyond Libourne Saint Antoine. A return to normal is not scheduled before 8 p.m.
From the secondary network and the D137, find the A10 and the directions of Nantes, Poitiers and Paris near Saint-Aubin-de Blaye.
Update from May 5 at 5:00 p.m.
Reopening on a path but plug always relevant
The left track was released at the height of the accident. Traffic has resumed since 4:50 p.m. But the rear cap extends over more than 5 km by encompassing the Virsac toll barrier. It will take time to fluidify. The recommended outputs remain relevant.
Traffic is stopped on the A10 towards Paris, north of Bordeaux. Around 2:45 pm this Monday, a heavyweight went through the tracks between the Libourne Saint-Antoine (n ° 39) and Blaye Montendre (n ° 38) outings. According to Yolande, from the Vinci Autoroutes traffic information center, “The truck lost its cargo, plastic coils, scattered on the road and in the ditches», Strongly complicating the intervention of the emergency services.
Shortly after the accident, traffic was fully interrupted in this sector. “”The plug now covers 4 km“She said at the microphone of Radio Vinci Autoroutes at 3:46 p.m. The congestion point now reaches the Virsac toll barrier, five kilometers from the place of the accident.
To get around the event, a compulsory outing was established in Libourne Saint-Antoine (n ° 39). Two other outings are also advised: Libourne Saint-Antoine (n ° 39b) and Saint-André-de-Cubzac (n ° 40A). Motorists are invited to take the secondary network, including the RD137, to reach the next interchange.
The resumption of traffic could take several hours, given the complete reversal of the truck and the necessary cleaning.
