Boeing said it had carried out investigations after a report by a “contract worker of a subcontractor” and said it had “addressed” the issues raised by a report, “which did not present a safety risk”.
An aircraft mechanic has contacted the American civil aviation regulator, the FAA, to alert it of possible assembly and maintenance defects on 787 aircraft, which Boeing claims have already been addressed. Richard Cuevas worked, on a contract basis but not as an employee, for Spirit AeroSystems, Boeing’s main subcontractor, according to his lawyers, Debra Katz and Lisa Banks.
In the course of his work repairing Boeing aircraft, the whistleblower says he observed practices “below standards” of quality concerning a partition of the fuselage of the 787, a long-haul aircraft.
In detail, workers would have drilled too large holes in this part of the device, which led to a risk of electrical failure and depressurization in flight, according to him.
“Our officials are aware of these allegations and are looking into them”
Richard Cuevas says he has observed these defects on three planes and estimates that at least 10 to 12 787s could be affected. He also indicates that he witnessed the improper application of a waterproofing coating. The mechanic made a report to Spirit AeroSystems, then to Boeing.
But neither company “corrected these practices,” according to the whistleblower’s lawyers. “Richard Cuevas was fired (in March 2024) after his manager suspected him of initiating the report.”
“We are studying the documents transmitted today and will investigate any new reports,” commented the aircraft manufacturer.
“Our managers are aware of these allegations and are looking into them,” a Spirit AeroSystems spokesperson commented. “We encourage all Spirit employees to raise any concerns they may have, knowing they will be protected.”
In mid-April, four whistleblowers, including an engineer and former Boeing employees, testified before a US Senate committee of inquiry to prevent “serious problems” in the production of Boeing 737 MAX, 787 Dreamliner and 777 aircraft. .
The American manufacturer is going through one of the most tormented periods in its history. Entangled in a series of production and compliance problems for several years, it saw regulators put additional pressure on it after an in-flight incident in early January.
