Switch update: a firmware 20.0.1 available, coming to correct a serious problem

This week, The owners of a switch were able to download a 20.0.0 version of the console system softwarewhich modified the HOME In particular by integrating the virtual gaming card system. Unfortunately, it was not done without worry in some people. As reported by the official account of Nintendo in Japan on Twitter / X, It is possible to receive an error code 2206-1014 or 2206-1015 preventing the machine to start. Fortunately, A 20.0.1 patch has since been deployed and a solution exists to restart the device in mode Restoration In order to do it if you have encountered this problem.

Here’s how to proceed:

Informations

We are aware of a problem when receiving the error code 2206-1014 or 2206-1015 during or after the installation of version 20.0.0. console and we are looking for possible solutions. If you encounter this problem, please follow the steps below.

Follow the steps below

• Make sure the console is off.
• Once the console is turned off, hold the increase (+) and reduced (-) pimpment pimples, then press the Power button to light the console.
  • Make sure you keep the volume buttons sunk until the catering mode menu appears.
• Once the catering mode is console, select update the console and follow the screen instructions to complete the process.
  • If a Parental Control Deputy Code has been defined on the console, you will be invited to grasp it. If you forget the secret code, you will have to reset it.

At least, Nintendo did not drag to settle this inconvenience.

If you don’t have a switch yet, the OLED model is sold from € 310.49 on Amazon.

Read also: Switch: Rare Donkey Kong is replaced by his new version of Bananza and Mario Kart World